Paradox EVO192 User Manual

88 EVO Installation Guide
Do not remove power from the control panel.
14.3 Installer Code Lock
SECTION [3001]
(default = 000) Enter 147 into section [3001] to lock all programming. When 147 is programmed, performing a
hardware reset as described in
section 14.1 will not affect the current panel settings. To remove the Installer
Lock, enter 000 into section [3001].
14.4 Daylight Savings Time
SECTION [3030]: OPTION [3]
(default = enabled) When enabled, the control panel adjusts the system's clock (time) for daylight saving
changes.
14.5 Daylight Savings Time Schedule
SECTION [3022]
(default = 18)
Select the schedule followed for the Daylight Savings Time adjustment.
[4048]
Entering this section resets the User Labels from
the User Access Codes, the Zone Labels from
[0301]
to
[0396], Door Labels from [2301] to [2332], Partition
Labels
[3100], [3200], [3300], [3400], [3500], [3600], [3700]
and
[3800] to default.
[4049]
Entering this section will unlock software reset for
sections [4040] to [4048].
00
Canada/United States/Mexico/
St-Johns/Bahamas/Turks and
Caicos
01
Cuba
02
Brazil
03
Chile
04
Falkland Islands
05
Paraguay
06
European Union/United
Kingdom/Greenland
07
Russia and surrounding
countries
08
South Australia/Victoria/
Australian Capital Territory/New
South Wales
09
Tasmania/Lord Howe Island
10
New-Zealand/Chatham
11
Tonga
12
Iraq/Syria
13
Israel (TBC)
14
Lebanon/Kirgizstan
15
Palestine
16
Egypt
17
Namibia
18
Canada/United States 2007
(default)
19
New Zealand

Paradox EVO192 Specifications

General

Brand	Paradox
Model	EVO192
Category	Smoke Alarm
Language	English