92 EVO Installation Guide
If new modules are detected, the serial number will be entered in the control panel’s memory.
14.20 Serial Number Viewing
SECTION [4000]
Enter section [4000] to view the serial number of the control panel and all the modules on the combus. The
firmware version of some modules will be displayed as well (e.g. (XXXXXXXX) VXX.XX).
For LCD Keypads: The keypad will display the control panel’s serial number. Use the [] and [] keys to scroll.
For Grafica Keypads: The keypad will display the control panel’s serial number. Press the center action key
(Next) to scroll.
14.21 Power Save Mode
SECTION [3033]: OPTIONS [4]
(default = enabled) When enabled and the control panel is running on the backup battery, the control panel
can set all keypads into Power Save Mode. The keypad's backlight and LEDs are disabled until a key is pressed,
an alarm occurs or an Entry Delay is triggered.
14.22 Auto Trouble Shutdown
SECTION [3021]
(default = 00) If a trouble occurs more than the number programmed, the control panel stops reporting the
trouble. Enter a value between 01 and 15, (00 = disabled). Each trouble has its own counter that is reset at
midnight.
14.23 No AC Fail Display
SECTION [3030]: OPTION [6]
(default = disabled) When enabled, the control panel will not display the AC Failure as a trouble. When an AC
Failure occurs with this option enabled:
• the AC LED will extinguish
• the AC Failure report code will be reported.
• the trouble will not appear in the Trouble Display
• the keypad will not beep to indicate the trouble
14.24 Multiple Action Feature
SECTION [3033]: OPTION [1]
(default = disabled) When enabled, users will remain in the User Menu after entering their access code. With
option
[1] off, the control panel will exit the User Menu after every action.
14.25 System Labels
The existing label displayed on the LCD screen can be modified to suit the installation’s needs. Each label
contains a maximum of 16 characters.
To re-program the System Label, enter the desired section and use Table 7, Table 9 and Table 8 (page 93) to
modify the label. For other languages, refer to Table 10 to Table 14 on page 96. For instructions on how to
enter letters and special characters for the Grafica keypad, refer to “Grafica’s Online Manual”. A complete
“Grafica Online Manual” is available on our
website at paradox.com.
Zone Labels: Sections [0301] to [0396] represent Zones 01 to 96.
Door Labels: Sections [2301] to [2332] represent Doors 01 to 32.
To Next Page
Loading...
Need help?
General
