82 EVO Installation Guide
If the utility key in the EVO panel is programmed with a timer, the VDMP3 will not recognize PGM
deactivation when the set timer elapses. As a result, the VDMP3 may indicate that the PGM is ON when
actually the timer has elapsed and the PGM is in fact OFF
12.3 VDMP3 Setup Instructions
Feature 3 OFF Utility Key 6 Feature 7 OFF Utility Key 14
Feature 4 ON Utility Key 7 Feature 8 ON Utility Key 15
Feature 4 OFF Utility Key 8 Feature 8 OFF Utility Key 16
Step
EVO
section
English
1
Enable
Functions
Select the following options to enable voice reporting and
arm/disarm function.
[3090]
[1] Arm/disarm (default 1 and 2 ON)
[2] Voice reporting
2
Telephone
Numbers
Program up to 8 telephone numbers which will be called in
sequence in the event of an alarm. Telephone numbers
should be programmed in priority sequence as the VDMP3
will start with telephone number 1. For extra key functions,
see
Special Telephone Number Keys on page 72.
[3091]
to
[3098]
[3091] Telephone number 1 [3095] Telephone number 5
[3092] Telephone number 2 [3096] Telephone number 6
[3093] Telephone number 3 [3097] Telephone number 7
[3094] Telephone number 4 [3098] Telephone number 8
3
Enable
Numbers
Choose which telephone numbers will be enabled for each
partition in your system. Options [1] to [8] represent
telephone numbers 1 through 8.
(Default: Telephone number 1 is enabled for all partitions.)
[3133]
to
[3833]
[3133] Partition 1 [1] to [8] [3533] Partition 5 [1] to [8]
[3233] Partition 2 [1] to [8] [3633] Partition 6 [1] to [8]
[3333] Partition 3 [1] to [8] [3733] Partition 7 [1] to [8]
[3433] Partition 4 [1] to [8] [3833] Partition 8 [1] to [8]
4
Answering
Machine
Override
If the VDMP3 uses a telephone line that is connected to an
answering machine or service, the Answering Machine
Override must be programmed. The value programmed in
section [3052] represents the delay period that the VDMP3
will wait between the first and second call. The user must
call the VDMP3, hang up, and then call back within the
value programmed in section [3052]. The module then
overrides the answering machine or service by picking up
the line on the first ring.
[3052]
000 to 225 seconds (default 008)
Note: Changing these values will also affect PC
communication via WinLoad software.
5
Enable
Features
(PGM)
Features in this section correspond to utility key PGMs in the
EVO control panel. For more information, see Feature
Activation (PGMs).
[3087] Options [1] to [8] represent features 1 to 8 (default: OFF)
6
Message
Delay
After the VDMP3 dials a phone number, it waits the
programmed delay period before sending the voice
message. The value programmed in section [3088]
represents the length of time the VDMP3 will wait before
playing the message.
[3088] 000 to 127 seconds (default 003)
7
Message
Repetitions
Set the number of times the VDMP3 will play the voice
message.
[3089] 000 to 008 repetitions (default 008)
8
Delay
Before Next
Number
Set the delay before the VDMP3 attempts to dial the next
number on the list.
[3054]
000 to 255 seconds
(default 020)
Note: Changing these values will also affect regular
reporting to monitoring station.