Paradox EVO192 User Manual

EVO Installation Guide 99
Enable or disable the options as required for each user access code as shown in Figure 21.
Figure 21: Programming User Access Codes
† The default setting depends on the programming user’s assigned partitions. For example, when a user (with master feature) that is assigned to partitions 1 and 2 programs a user code,
partitions 1 and 2 will be the default setting for the new user.
* Remote controls can also be assigned using a Master Code.
Press & hold
the [0] key
Where sections [1002] to [1999]
represent
Key in the
[
INSTALLER
CODE]
Enter
[
SECTION]
User Options
Feature Select
Programming
User
Partition
Assignment
Feature Select
Programming
Access
Level &
Schedule
Assignment
Enter digits
Access
Control User
Options
Feature Select
Programming
Enter
Access Card
User Options
[1] [2]Master Feature
OFF OFFDisabled
ON OFFMaster - user can program
user access codes only
ON ONFull Master - user can program
user access codes, options, and
assignments
Partition Assignment †
[1] User Code has Access to Partition 1
[2] User Code has Access to Partition 2
[3] User Code has Access to Partition 3
[4] User Code has Access to Partition 4
Access Level & Schedule Assignment
First Brackets: Access Level
Enter Level from 00 to 15 (00 = all
doors)
Access Control Options
[1] Access Control
[2] Can Disarm with Access Card
[3] Card with Door Unlocked Period
Extension
[4] [5]Feature
off offCannot Arm with Card
(arming disabled)
on offCan Regular Arm with Card
Access Card Assignment
Enter Access Card's serial number
Remote
Control
Assignment
Remote Control Assignment*
Enter remote control’s serial number
Press [ENTER] or [] to
save
Press the [] key
Press the [] key
Press the [
] key

Paradox EVO192 Specifications

General

Brand	Paradox
Model	EVO192
Category	Smoke Alarm
Language	English