Operation Guide 500ML Lighting Control Console
116 Programming
A window will open asking you to select the Cue you would like the new cue to be inserted in front of. See Figure
214 for more details. Click on Insert after selecting the Cue the new Cue should be inserted in front of.
Figure 214: Insert Cue into Cuelist Window
Deleting Cues
To delete a cue from a Cuelist, press the [DELETE] key on the keypad. Select the Delete Cue option from the Delete
toolbar. Now select the appropriate Cuelist by the either a master's (Figure 196 on page 109) Play [] or Pause / Back
Key [❚ ❚], or by selecting the cuelist in a Cuelist Pool Window.
If the Cuelist Pool window is not yet shown, keep the [DELETE] key pressed while pressing the [CUELIST] button
on the keypad prior to selecting the Delete Cues option from the Delete Toolbar..
Figure 215: Delete Toolbar - Delete Cues Button
You may also use the command line approach by, press the [DELETE] key followed by the [CUELIST] key. Now
select the Delete Cue option from the Delete Toolbar. Type the number of the cuelist you would like to delete a cue
from - i.e., [1].
Figure 216: Command Line Interface - Delete Cuelist
A window will open asking you to select the cues to be deleted. See Figure 217 on page 117 for more details. Click on
Delete after selecting the Cue(s) from the list.
Note: Because of tracking, if switched on for this cuelist, the results may look different than what you expected.
To Next Page
Loading...
