Showfile Settings 45
500ML Lighting Control Console
Operation Guide
Setting Button Backlight
Turning the first rotary encoder while the Setup Menu > Show Settings screen is shown will set the brightness of the
button backlighting.
Figure 68: Button Backlighting Adjustment Setting
Setting LCD Intensity
Turning the second rotary encoder while the Setup Menu > Show Settings screen is shown will set the LCD displays
above the faders.
Figure 69: Fader LCD Display Adjustment Setting
Setting TFT Touchscreen Intensity
Turning the third rotary encoder while the Setup Menu > Show Settings screen is shown will set the brightness of the
TFT Touchscreen display.
Figure 70: TFT Display Brightness Adjustment Setting
Setting Desk Lamp Intensity
Turning the third rotary encoder while the Setup Menu > Show Settings screen is shown will set the brightness of the
LED Desk Lamp (supplied with unit)..
Figure 71: Desk Lamp Intensity Adjustment Setting
Set Encoder Sensitivity & Acceleration
To adjust the Encoder sensitivity and acceleration settings, press [SETUP] and click the Show Settings Tab. In this
tab, select the Encoder Settings button as shown in Figure 72.
Figure 72: Setup Menu - Show Settings Tab
To Next Page
Loading...
