Editing the Fixture Library 147
500ML Lighting Control Console
Operation Guide
Unlocking the Console
If the console is locked, the Desklock window (Figure 265) will appear. To unlock the console click on the Unlock
button as indicated in Figure 265. A new screen prompting for the unlock key will be shown. Enter the set PIN code
and click on OK.
Figure 265: Desklock Window
WARNING! Philips Strand Lighting does not receive or keep user-set PIN codes. Once you establish a PIN code,
write it down and keep it in a safe place in case you forget the PIN code you set.
13. Editing the Fixture Library
This section is set to help you, should you wish to change a fixture type's DMX footprint or default values, or in case
you create a new fixture that is not yet contained in the library.
From the Welcome Screen
To edit the fixture library from the welcome screen, click on Settings and make sure the System Setup tab is selected.
Figure 266: Welcome Screen - Settings Button
To Next Page
Loading...
