Working with Masters 129
500ML Lighting Control Console
Operation Guide
Groups
Cuelists
Master Speeds
Button Function Action of Button Press
Disabled
Select Fixture Selects the fixtures contained in the Group.
Flash
Will flash the fixtures Master Dimmer Level of the selected Group to 100%, which means the
dimmer value of the fixture is determined by cuelist output and the programmer.
Fader Function Action of Button Press
Disabled
Fixture Submaster The fader acts as an Inhibitive Dimmer Fader for the appropriate Group.
Button Function Action of Button Press
Disabled
Select Cuelist Selects the cuelist.
Toggle On / Off The first press on the button will start the cuelist, the second press will switch it off.
Go
Issues a Go command to start the cuelist, or, if it is already running, advances through the
different cues of the cuelist.
Pause / Back
The first press on the button will pause the cuelist including all ongoing fades. The second
press will advance through the cuelist in reversed order.
Skip +
Skips to the next cue in the cuelist without switching it on. If the cuelist is running it will skip to
the next cue, ignoring all fade times.
Skip -
Skips to the previous cue in the cuelist without switching it on. If the cuelist is running it will skip
to the previous cue, ignoring all fade times.
Flash Will flash the master’s fader value to 100% without switching the cuelist on or off.
Flash + Go
Will flash the master’s fader value to 100% and switch on the cuelist. The cuelist stays "On"
after releasing the button.
Flash + Go + Off
Will flash the master’s fader value to 100% and switch on the cuelist. The cuelist will be
switched "Off" when releasing the button.
Flash + Off
Will flash the master’s fader value to 100% and switch off the cuelist when releasing the
button. It will not start the cuelist.
Off Switches off the cuelist using the Off time to fade out given in the cuelist options.
Instant Off Switches off the cuelist ignoring the Off time set in the cuelist options.
Assert Will bring the cuelist "Up Front" in the priority stack but does not advance through the cuelist.
Fader Function Action of Button Press
Disabled
Dimmer
The fader acts as a Dimmer Master for the cuelist contents. Only dimmer channels are
effected.
Speed
The fader controls cuelist (Next, Fade and Snap Timings) and Effect speed of the contained
cuelist. 100% is equivalent to the speed programmed.
Infade
The fader will fade all parameters contained in the cuelist, even channels set to Snap within the
Fixture Library.
X-Fade The fader will crossfade between the current and the next cue allowing for manual crossfades.
Button Function Action of Button Press
Disabled
Time Increase Adds the amount of time entered in the combobox.
Time Decrease Subtracts the amount of time entered in the combobox.
Time Multiply Multiplies the time of the Speedmaster by the entered amount.
Time Divide Divides the time of the Speedmaster by the amount entered in the Options combobox.
Tap Sync Measures the time between taps and sets the Speedmaster to that amount.
Manual Go
Will issue a "Go" command to all cuelists listening to this Speedmaster. It only applies to
cuelists that are already running.
Toggle On / Off Will Pause / Un-pause the Speedmaster.
To Next Page
Loading...
