User’s Manual of WGSD-10020 Series
Setup steps
1. Assign Port Mode
Set Port-1~Port-4 in Isolate port.
Set Port5 and Port-6 in Promiscuous port. The screen in Figure 4-6-15 appears.
Figure 4-6-15 The configuration of Isolate and Promiscuous port
2. Assign VLAN Member :
VLAN 1 : Port-1,Port-2 ,Port-5 and Port-3
VLAN 2 : Port-3~Port-6. The screen in Figure 4-6-16 appears.
Figure 4-6-16 Private VLAN port setting
To Next Page
Loading...
