Planet WGSD-10020 - Security Switch SNMP Trap Mode; Security Switch SNMP Trap Version

User’s Manual of WGSD-10020 Series
378
Example:
Set public value in SNMP write community.
WGSD
-10020HP:/>security switch snmp write community public
Security Switch SNMP Trap Mode
Description:
Set or show the SNMP trap mode.
Syntax:
Security Switch SNMP Trap Mode [enable|disable]
Parameters:
enable : Enable SNMP traps
disable: Disable SNMP traps
(default: Show SNMP trap mode)
Default Setting:
disable
Example:
Enable SNMP trap mode.
WGSD
-10020HP:/>security switch snmp trap mode enable
Security Switch SNMP Trap Version
Description:
Set or show the SNMP trap protocol version.
Syntax:
Security Switch SNMP Trap Version [1|2c|3]
Parameters:
1 : SNMP version 1
2c: SNMP version 2c
3 : SNMP version 3
(default: Show SNMP trap version)