Planet WGSD-10020 - System Contact; System Name

User’s Manual of WGSD-10020 Series
324
Example:
To show the log server mode:
WGSD
-10020HP:/>System log server mode
System Log Server Mode : Disabled
System Name
Description:
Set or show the system name.
Syntax:
System Name [<name>] [clear]
Parameters:
<name>: System name string. (1-255)
Use 'clear' or "" to clear the string
System name is a text string drawn from the alphabet (A-Za-z), digits (0-9), minus sign (-).
In CLI, no blank or space characters are permitted as part of a name.
The first character must be an alpha character, and the first or last character must not be a minus sign.
clear : Clear system name
Example:
To set device title:
WGSD
-10020HP:/>System name WGSD-10020HP-LAB
System Contact
Description:
Set or show the system contact.
Syntax:
System Contact [<contact>] [clear]
Parameters:
<contact>: System contact string. (1-255)
Use 'clear' or "" to clear the string
In CLI, No blank or space characters are permitted as part of a contact.
clear : Clear system contact