Planet WGSD-10020 - VLAN Configuration; Vlav Pvid; VLAN Configuration Command

User’s Manual of WGSD-10020 Series
350
6.5 VLAN Configuration Command
VLAN Configuration
Description:
Show VLAN configuration.
Syntax:
VLAN Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all',
(default: All ports)
Example:
Show VLAN status of port1
WGSD
-10020HP:/>vlan configuration 1
VLAN
Configuration:
===================
Mode : IEEE 802.1Q
Port PVID IngrFilter FrameType LinkType Q
-in-Q Mode Eth type
----
---- ---------- ---------- -------- ----------- --------
1 1 Disabled All UnTag Disable N/A
VID VLAN Name Ports
----
-------------------------------- -----
1 default 1
-10
VID VLAN Name Ports
----
-------------------------------- -----
VLAN forbidden table is e
mpty
VLAV PVID
Description:
Set or show the port VLAN ID.