Planet WGSD-10020 - MVR Immediate Leave

User’s Manual of WGSD-10020 Series
503
Syntax:
MVR Port Type [<port_list>] [source|receiver]
Parameters:
<port_list>: Port list or 'all', default: All ports
source : Enable source mode
receiver : Disable receiver mode
(default: Show MVR port type)
Default Setting:
receive
Example:
Set source type for MVR port type of port 1.
WGSD
-10020HP:/>mvr port type 1 source
MVR Immediate Leave
Description:
Set or show MVR port state about immediate leave.
Syntax:
MVR Immediate Leave [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable Immediate-leave mode
disable : Disable Immediate-leave mode
(default: Show MVR Immediate-leave mode)
Default Setting:
disable
Example:
Enable MVR port state about immediate leave for port 1.
WGSD
-10020HP:/>mvr immediate leave 1 enable