Planet WGSD-10020 - Security Switch Access Add; Security Switch Access Mode

User’s Manual of WGSD-10020 Series
372
System Access M
ode : Disabled
W: WEB/HTTPS
S: SNMP
T: TELNET/SSH
Idx Start IP Address End IP Address W S T
---
------------------------------- ------------------------------ - - -
Security Switch Access Mode
Description:
Set or show the access management mode.
Syntax:
Security Switch Access Mode [enable|disable]
Parameters:
enable : Enable access management
disable: Disable access management
(default: Show access management mode)
Default Setting:
disable
Example:
Enable switch access mode
WGSD
-10020HP:/>security switch access mode enable
Security Switch Access Add
Description:
Add access management entry, default: Add all supported protocols.
Syntax:
Security Switch Access Add <access_id> <start_ip_addr> <end_ip_addr> [web] [snmp] [telnet]
Parameters: