Planet WGSD-10020 - LLDP Interval; LLDP Hold

User’s Manual of WGSD-10020 Series
453
System capabilities: Enable
Master's IP address: Enable
Example:
Disable description of the port for port1
WGSD
-10020HP:/>lldp optional_tlv 1 port_descr disable
LLDP Interval
Description:
Set or show LLDP Tx interval.
Syntax:
LLDP Interval [<interval>]
Parameters:
<interval>: LLDP transmission interval (5-32768)
Default Setting:
30
Example:
Set transmission interval in 10
WGSD
-10020HP:/>lldp interval 10
LLDP Hold
Description:
Set or show LLDP Tx hold value.
Syntax:
LLDP Hold [<hold>]
Parameters:
<hold>: LLDP hold value (2-10)
Default Setting:
3