Planet WGSD-10020 - Security Network NAS Holdtime; Security Network NAS Radius_Qos

User’s Manual of WGSD-10020 Series
404
Security Network NAS Agetime [<age_time>]
Parameters:
<age_time>: Time between checks for activitiy on a MAC address that succeeded autentication
(default: Show current age time)
Default Setting:
300
Example:
Set NAS age time in 1000sec
WGSD
-10020HP:/>security network nas agetime 1000
Security Network NAS Holdtime
Description:
Time in seconds before a MAC-address that failed authentication gets a new authentication chance.
Syntax:
Security Network NAS Holdtime [<hold_time>]
Parameters:
<hold_time>: Hold time before MAC addresses that failed authentication expire
(default: Show current hold time)
Default Setting:
10
Example:
Set NAS hold time in 100sec
WGSD
-10020HP:/>security network nas holdtime 100
Security Network NAS RADIUS_QoS
Description:
Set or show either global enabledness (use the global keyword) or per-port enabledness of RADIUS-assigned QoS.
Syntax: