User’s Manual of WGSD-10020 Series
Add or modify SNMPv3 group entry.
The entry index key are <security_model> and <security_name>.
Syntax:
Security Switch SNMP Group Add <security_model> <security_name> <group_name>
Parameters:
<security_model>: v1 - Reserved for SNMPv1
v2c - Reserved for SNMPv2c
usm - User-based Security Model (USM)
<security_name> : A string identifying the security name that this entry should belong to. The allowed string length is
(1-32), and the allowed content is ASCII characters from 33 to 126
<group_name> : A string identifying the group name that this entry should belong to. The allowed string length is
(1-32), and the allowed content is ASCII characters from 33 to 126
Example:
Add SNMPv3 group entry
-10020HP:/>security switch snmp group add usm admin_snmpv3 group_snmpv3
Security Switch SNMP Group Delete
Description:
Delete SNMPv3 group entry.
Syntax:
Security Switch SNMP Group Delete <index>
Parameters:
<index>: entry index (1-64)
Example:
Delete SNMPv3 group entry
-10020HP:/>security switch snmp group delete 1
Security Switch SNMP Group Lookup
Description:
To Next Page
Loading...
Need help?
General