Planet WGSD-10020 - Qos Port Shaper Mode

User’s Manual of WGSD-10020 Series
481
Parameters:
<port_list> : Port list or 'all', default: All ports
<queue_list>: Queue list or 'all', default: All queues (0-7)
enable : Enable use of excess bandwidth
disable : Disable use of excess bandwidth
(default: Show port queue excess bandwidth mode)
Default Setting:
disable
Example:
Enable the port queue excess bandwidth mode.
WGSD
-10020HP:/>qos Port QueueShaper Excess 1-10 0-7 enable
QoS Port Shaper Mode
Description:
Set or show the port shaper mode.
Syntax:
QoS Port Shaper Mode [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable port shaper
disable : Disable port shaper
(default: Show port shaper mode)
Default Setting:
Enable
Example:
Enable port shaper mode.
WGSD
-10020HP:/>qos Port Shaper Mode 1-10 enable