User’s Manual of WGSD-10020 Series
-10020HP:/>qos Port Classification tag 1-10 enable
QoS Port Classification Map
Description:
Set or show the port classification map.
This map is used when port classification tag is enabled,and the purpose is to translate the Priority Code Point (PCP) and
Drop Eligible Indicator (DEI) from a tagged frame to QoS class and DP level.
Syntax:
QoS Port C
lassificati
on M
ap [<port_l
ist>] [<
pcp_list>]
[<dei_li
st>] [<cl
ass>] [<d
pl>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<pcp_list> : PCP list or 'all', default: All PCPs (0-7)
<dei_list> : DEI list or 'all', default: All DEIs (0-1)
<class> : QoS class (0-7)
<dpl> : Drop Precedence Level (0-1)
QoS Port Classification DSCP
Description:
Set or show if the classification is based on DSCP value in IP frames.
Syntax:
QoS Port Classification DSCP [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable DSCP based classification
disable : Disable DSCP based classification
(default: Show DSCP based classification mode)
Default Setting:
disable
To Next Page
Loading...
Need help?
General