Planet WGSD-10020 - AF;AT Mode; Poe Priority

User’s Manual of WGSD-10020 Series
466
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enables PoE
disable : Disable PoE
(default: Show PoE's mode)
Default Setting:
enable
Example:
Disable PoE function of port1~4
WGSD
-10020HP:/>poe mode1-4 disable
AF/AT Mode
Description:
Allows user to set up 802.3af (type1) or 802.3at (type2) mode to per port.
Syntax:
PoE mode [<port_list>] [af|at]
Parameters:
<port_list>: Port list or 'all', default: All ports
af : IEEE 802.3af mode
at : IEEE 802.3at mode
PoE Priority
Description:
Show / Set PoE Priority.
Syntax:
PoE Priority [<port_list>] [low|high|critical]
Parameters:
<port_list>: Port list or 'all', default: All ports
low : Set priority to low
high : Set priority to high
critical: Set priority to critical
(default: Show PoE priority)
Default Setting:
high