Planet WGSD-10020 - STP Port Autoedge; STP Port P2 P

User’s Manual of WGSD-10020 Series
438
WGSD
-10020HP:/>stp port edge 1 enable
STP Port AutoEdge
Description:
Set or show the STP autoEdge port parameter.
Syntax:
STP Port AutoEdge [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
Enable : Enable MSTP autoEdge
Disable : Disable MSTP autoEdge
Default:
enable
Example:
Disable STP edge function on port1
WGSD
-10020HP:/>stp port autoedge 1 disable
STP Port P2P
Description:
Set or show the STP point2point port parameter.
Syntax:
STP Port P2P [<port_list>] [enable|disable|auto]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable MSTP point2point
disable : Disable MSTP point2point
auto : Automatic MSTP point2point detection