User’s Manual of WGSD-10020 Series
Parameters:
<engineid> : Engine ID, the format may not be all zeros or all 'ff'H and is restricted to 5 - 32 octet string
<user_name> : A string identifying the user name that this entry should belong to. The name of "None" is reserved.
The allowed string length is (1-32), and the allowed content is ASCII characters from 33 to 126
<auth_password>: A string identifying the authentication pass phrase
<priv_password>: A string identifying the privacy pass phrase.
The allowed string length is (8-40), and the allowed content is ASCII characters from 33 to 126
Example:
Delete SNMPv3 user entry
-10020HP:/>security switch snmp user changekey 800007e5017f000003
admin_snmpv3 87654321 12345678
Security Switch SNMP User Lookup
Description:
Lookup SNMPv3 user entry.
Syntax:
Security Switch SNMP User Lookup [<index>]
Parameters:
<index>: entry index (1-64)
Example:
Lookup SNMPv3 user entry
-10020HP:/>security switch snmp user lookup
User Name Level Auth Priv
--------- -------------------------------- -------------- ---- ----
1 Remote admin_snmpv3 Auth, Priv MD5 DES
Security Switch SNMP Group Add
Description:
To Next Page
Loading...
Need help?
General