User’s Manual of WGSD-10020 Series
igmp: IPMC for IPv4 IGMP
<port_list>: Port list or 'all', default: All ports
enable : Enable IPMC router port
disable : Disable IPMC router port
(default: Show IPMC router port mode)
Example:
Enable port 1 in IPMC router port
-10020HP:/>ipmc riuter igmp 1 enable
IPMC Status
Description:
Show IPMC operational status, accordingly.
Syntax:
IPMC Status [mld|igmp] [<vid>]
Parameters:
mld|igmp:
mld : IPMC for IPv6 MLD
igmp: IPMC for IPv4 IGMP
<vid> : VLAN ID (1-4095) or 'any', default: Show all VLANs
Example:
Show VLAN 1 IPMC operational status
-10020HP:/>ipmc status igmp 1
IPMC Group
Description:
Show IPMC group addresses, accordingly.
Syntax:
IPMC Groups [mld|igmp] [<vid>]
Parameters:
To Next Page
Loading...
Need help?
General