User’s Manual of WGSD-10020 Series
LED Power Maintenance
Description:
Set or show the maintenance settings.
Syntax:
led_power maintenance [<maintenance_time>] [on_at_errors|leave_at_errors]
Parameters:
<maintenance_time> : Time in seconds (0-65535) that the LEDs shall be turned on, when any port changes
link state
on_at_errors|leave_at_errors: on_at_error if LEDs shall be turned on if any errors has been detected. leave_at_errors if
no LED change shall happen when errors have been detected
LED Power Configuration
Description:
Show Led Power Reduction configuration.
Syntax:
led_power configuration
To Next Page
Loading...
Need help?
General