Planet WGSD-10020 - System Location; System Log Server Address

User’s Manual of WGSD-10020 Series
325
Default Setting:
empty
Example:
To set device contact:
WGSD
-10020HP:/>System contact WGSD-10020HP-Test
System Log Server Address
Description:
Show or set the system log server address.
Syntax:
System Log Server Address [<ip_addr_string>]
Parameters:
<ip_addr_string>: IP host address (a.b.c.d) or a host name string
Default Setting:
empty
Example:
To set log server address:
WGSD
-10020HP:/> log server address 192.168.0.21
System Location
Description:
Set or show the system location.
Syntax:
System Location [<location>] [clear]
Parameters:
<location>: System location string. (1-255)
Use 'clear' or "" to clear the string
In CLI, no blank or space characters are permitted as part of a location.