Planet WGSD-10020 - Qos Port Policer Mode; Qos Port Policer Rate

User’s Manual of WGSD-10020 Series
477
Example:
Enable QoS port classification DSCP.
WGSD
-10020HP:/>qos Port Classification dscp 1-10 enable
QoS Port Policer Mode
Description:
Set or show the port policer mode
Syntax:
QoS Port Policer Mode [<port_list>] [enable|disable]
Parameters:
<port_list>: Port list or 'all', default: All ports
enable : Enable port policer
disable : Disable port policer
(default: Show port policer mode)
Default Setting:
disable
Example:
Enable QoS port policer
WGSD
-10020HP:/>qos Port Policer Mode 1-10 enable
QoS Port Policer Rate
Description:
Set or show the port policer rate.
Syntax:
QoS Port Policer Rate [<port_list>] [<rate>]
Parameters:
<port_list>: Port list or 'all', default: All ports
<rate> : Rate in kbps or fps (100-15000000)