Planet WGSD-10020 - Security Switch SNMP View Add

User’s Manual of WGSD-10020 Series
390
Lookup SNMPv3 group entry.
Syntax:
Security Switch SNMP Group Lookup [<index>]
Parameters:
<index>: entry index (1-64)
Example:
Lookup SNMPv3 group entry
WGSD
-10020HP:/>security switch snmp group lookup
Idx Model Security Name
Group Name
---
----- -------------------------------- --------------------------------
1 v1 public default_ro_group
2 v1 private default_rw_group
3 v2c public
default_ro_group
4 v2c private default_rw_group
5 usm default_user default_rw_group
Number of entries: 5
Security Switch SNMP View Add
Description:
Add or modify SNMPv3 view entry.
The entry index key are <view_name> and <oid_subtree>.
Syntax:
Security Switch SNMP View Add <view_name> [included|excluded] <oid_subtree>
Parameters:
<view_name> : A string identifying the view name that this entry should belong to. The allowed string length is (1-32),
and the allowed content is ASCII characters from 33 to 126
included : An optional flag to indicate that this view subtree should included
excluded : An optional flag to indicate that this view subtree should excluded
<oid_subtree>: The OID defining the root of the subtree to add to the named view
Example:
Add SNMPv3 view entry