Planet WGSD-10020 - Security Network Limit Reopen

User’s Manual of WGSD-10020 Series
399
Syntax:
Security Network Limit Action [<port_list>] [none|trap|shut|trap_shut]
Parameters:
<port_list> : Port list or 'all', default: All ports
none|trap|shut|trap_shut: Action to be taken in case the number of MAC addresses exceeds the limit
none : Don't do anything
trap : Send an SNMP trap
shut : Shutdown the port
trap_shut: Send an SNMP trap and shutdown the port
(default: Show current action)
Default Setting:
none
Example:
Set trap mode for limit action for port 1
WGSD
-10020HP:/>security network limit action 1 trap
Security Network Limit Reopen
Description:
Reopen one or more ports whose limit is exceeded and shut down.
Syntax:
Security Network Limit Reopen [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Reopen port 1
WGSD
-10020HP:/>security network limit reopen 1