Planet WGSD-10020 - STP MSTI Priority; STP MSTI Map

User’s Manual of WGSD-10020 Series
435
STP MSTI Priority
Description:
Set or show the bridge instance priority.
Syntax:
STP Msti Priority [<msti>] [<priority>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<priority> : STP bridge priority (0/16/32/48/.../224/240)
Default:
128
Example:
Set MST1 priority value in 48.
WGSD
-10020HP:/>stp msti priority 1 48
STP MSTI Map
Description:
Show or clear MSTP MSTI VLAN mapping configuration.
Syntax:
STP Msti Map [<msti>] [clear]
Parameters:
<msti>: STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
Clear : Clear VID to MSTI mapping
Example:
Add MST1 priority value in 48.
WGSD
-10020HP:/>stp msti priority 1 48