Planet WGSD-10020 - Security Switch SNMP Mode; Security Switch SNMP Version

User’s Manual of WGSD-10020 Series
376
Security Switch SNMP Mode
Description:
Set or show the SNMP mode.
Syntax:
Security Switch SNMP Mode [enable|disable]
Parameters:
enable : Enable SNMP
disable: Disable SNMP
(default: Show SNMP mode)
Default Setting:
enable
Example:
Disable SNMP mode.
WGSD
-10020HP:/>security switch snmp mode disable
Security Switch SNMP Version
Description:
Set or show the SNMP protocol version.
Syntax:
Security Switch SNMP Version [1|2c|3]
Parameters:
1 : SNMP version 1
2c: SNMP version 2c
3 : SNMP version 3
(default: Show SNMP version)
Default Setting:
2c
Example:
Set SNMP in version 3.