Planet WGSD-10020 - VLAN Ethernet Type; VLAN Add

User’s Manual of WGSD-10020 Series
354
Example:
Set port2 in man port
WGSD
-10020HP:/>vlan qinq 2 man
VLAN Ethernet Type
Description:
Set or show out layer VLAN tag ether type in Q-in-Q VLAN mode.
Syntax:
VLAN Ethtype [<port_list>] [man|dot1q]
Parameters:
<port_list>: Port list or 'all', default: All ports
man : Set out layer VLAN tag ether type : MAN
dot1q : Set out layer VLAN tag ether type : 802.1Q
(default: Show VLAN out layer VLAN tag ether type)
Default Setting:
N/A
Example:
Set out layer VLAN tag Ethernet type for port 10 in man Ethernet type
WGSD
-10020HP:/>vlan ethtype 10 man
VLAN Add
Description:
Add or modify VLAN entry.
Syntax:
VLAN Add <vid>|<name> [<port_list>]
Parameters:
<vid>|<name>: VLAN ID (1-4095) or VLAN Name
<port_list> : Port list or 'all', default: All ports