Planet WGSD-10020 - STP Port Mcheck; STP MSTI Port Configuration

User’s Manual of WGSD-10020 Series
441
Parameters:
<port_list>: Port list or 'all', default: All ports
clear : Clear the selected port statistics
Example:
Show STP port statistics.
WGSD
-10020HP:/>stp port statistics
Port Rx MSTP Tx MSTP Rx RSTP Tx RSTP Rx STP Tx STP Rx TCN
Tx TCN Rx Ill. Rx Unk.
---------
-------- -------- -------- -------- ------- ------- ------- ------- ------- -------
STP Port Mcheck
Description:
Set the STP mCheck (Migration Check) variable for ports.
Syntax:
STP Port Mcheck [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Set the STP mCheck (Migration Check) variable for port 1.
WGSD
-10020HP:/>stp port mcheck 1
STP MSTI Port Configuration
Description:
Show the STP port instance configuration.
Syntax:
STP Msti Port Configuration [<msti>] [<port_list>]
Parameters:
<msti> : STP bridge instance no (0-7, CIST=0, MSTI1=1, ...)
<port_list>: Port list or 'all', default: All ports