User’s Manual of WGSW-28040 / 28040P
121
cost is used when establishing the active topology of the network. Lower path
cost ports are chosen as forwarding ports in favor of higher path cost ports. Valid
values are in the range 1 to 200000000.
• Priority
Controls the port priority. This can be used to control priority of ports having
identical port cost. (See above).
Buttons
: Click to apply changes.
Figure 4-6-15 MST Port Status page screenshot
The page includes the following fields:
Object Description
• Port
The switch port number of the logical STP port.
• MSTI ID
Display the current MSTI ID.
To Next Page
Loading...
Need help?
General