Planet WGSW-28040 - No Enable; No Telnet; No Ipv6 Auto-Configuration

User’s Manual of WGSW-28040 / 28040P
203
Example:
Disable local user:
WGSW-28040(config)# no username 12345
WGSW-28040(config)#
No Enable
Description:
Disable local enable password
Syntax:
no enable
Example:
Disable local enable password:
WGSW-28040(config)# no enable
WGSW-28040(config)#
No Telnet
Description:
Disable Telent daemon configuration
Syntax:
no telnet
Example:
Disable Telent daemon configuration:
WGSW-28040(config)# no telnet
WGSW-28040(config)#
No IPv6 Auto-configuration
Description:
Disable IPv6 Auto-configuration
Syntax:
no ipv6 auto-configuration
Example:
Disable IPv6 Auto-configuration:
WGSW-28040(config)# no ipv6 auto-configuration
WGSW-28040(config)#