Planet WGSW-28040 - Ipv6 Gateway; Log Command; Log Restart; Log Server

User’s Manual of WGSW-28040 / 28040P
271
IPv6 Gateway
Description:
Set IPv6 gateway
Syntax:
ipv6 gateway <ipv6_address>
Parameters:
gateway: IPv6 router , default: Show IPv6 router.
IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a colon
separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be
used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it can only appear
once. It also used a following legally IPv4 address. For example,'::192.1.2.34'.
Example:
To set IPv6 gateway:
WGSW-28040(config)# ipv6 gateway 2001::0002
6.3.43 Log Command
Log Restart
Description:
Restart syslog daemon
Syntax:
log restart
Example:
To restart syslog daemon:
WGSW-28040(config)# log restart
Log Server
Description:
Set the remote server, maximum 4 servers can be configured
Syntax:
log server <server_index> <A.B.C.D> <server_port> <severity>
Parameters:
Server_index :Remote server index (1-4)