Planet WGSW-28040 - No SNMP Host; No Spanning Tree; No Storm Control

User’s Manual of WGSW-28040 / 28040P
200
No SNMP Host
Description:
Delete SNMP host function
Syntax:
no snmp host <A.B.C.D>
Parameters:
<A.B.C.D>: IP Address format is A.B.C.D where (A/B/C/D = 0 ~ 254)
Example:
Delete SNMP host function:
WGSW-28040(config)# no snmp host 192.168.0.20
WGSW-28040(config)#
No Storm Control
Description:
Disable storm control function
Syntax:
no storm-control [<port_list>] [broadcast|multicast|unknown-unicast|unknown-multicast]
Parameters:
<port_list>: Port list or 'all'
broadcast :Broadcast storm control
multicast :Multicast storm control
unknown-unicast :Unknown-unicast storm control
unknown-multicast :Unknown-multicast storm control
Example:
Disable storm control function:
WGSW-28040(config)# no storm-control port 1 broadcast
WGSW-28040(config)#
No Spanning Tree
Description:
Disable spanning tree function
Syntax:
no spanning-tree [<force-version>] [<hello-time>] [<max-hops>] [<forward-delay >] [<maximum-age>] [<tx-hold-count>]
[<port>] [port_list] [<mst>] [<config-name>] [<config-revision>]