Planet WGSW-28040 - Show LACP; Show Mirror

User’s Manual of WGSW-28040 / 28040P
213
Show MAC address table configuration
Syntax:
Show mac-address-table [<static>] [<filter>] [<multicast>] [<A:B:C:D:E:F>] [<port>] [<port_list>] [<vlan>] [vid]
Parameters:
<statics> : Static unicast and multicast entries
<filter> : MAC address filter configuration
<multicast> : Static multicast entries
A:B:C:D:E:F :MAC address xx:xx:xx:xx:xx:xx
<port> : Port configuration
port_list : Port list or 'all'
<vid> : VLAN ID (1-4094)
Example:
Show IGMP snooping router:
WGSW-28040(config)# show igmp-snooping router
VID | Port | Expiry Time (Sec)
-----------+-----------+--------------------------------
WGSW-28040(config)#
Show LACP
Description:
Show LACP configuration
Syntax:
Show lacp
Example:
Show LACP configuration:
WGSW-28040(config)# show lacp
LACP is Disabled
System Priority: 32768
WGSW-28040(config)#
Show Mirror
Description:
Show mirror configuration
Syntax:
Show mirror