Planet WGSW-28040 - IGMP Snooping Robustness Variable; IGMP Snooping Response Time; IGMP Snooping Query Interval

User’s Manual of WGSW-28040 / 28040P
236
IGMP Snooping Robustness Variable
Description:
Set IGMP snooping Robustness Variable
Syntax:
igmp-snooping robustness-variable <rnage>
Parameters:
range : Valid range is 1-255. Default is 2.
Example:
To set IGMP snooping Robustness Variable:
WGSW-28040(config)# igmp-snooping robustness-variable 20
IGMP Snooping Response Time
Description:
Set IGMP snooping response time
Syntax:
igmp-snooping response-time <time_sec>
Parameters:
Time_sec : Valid range is 10-25 Sec. Default is 10 Sec.
Example:
To set IGMP snooping response time:
WGSW-28040(config)# igmp-snooping response time 20
IGMP Snooping Query Interval
Description:
Set IGMP snooping query interval
Syntax:
igmp-snooping query-interval <time_sec>
Parameters:
time_sec : Valid range is 1-600 Sec. Default is 125 Sec.
Example:
To set IGMP snooping query interval:
WGSW-28040(config)# igmp-snooping query-interval 20