Planet WGSW-28040 - SNTP Command; Timezone; Copy Command; Copy Running-Config

User’s Manual of WGSW-28040 / 28040P
263
Syntax:
time date <year> <month> <day> <hour> <min> <sec>
Parameters:
year : Year (Format: YYYY) (1990-2037)
month : Month (Format: MM) (1-12)
day : Day (Format: DD) (1-31)
hour : Hour (Format: hh) (0-23)
min : Min (Format: mm) (0-59)
sec : Sec (Format: ss) (0-59)
Example:
To set the time zone of system:
WGSW-28040(config)# time date 2011 4 25 15 50 50
6.3.32 SNTP Command
Timezone
Description:
Set theSimple Network Time Protocol
Syntax:
sntp server <A.B.C.D> port <tcp_udp_port>
Parameters:
A.B.C.D : IP default gateway format is A.B.C.D where (A/B/C/D = 0 ~ 254)
Tcp_udp_port : TCP/UDP port (1-65535)
Example:
To set the Simple Network Time Protocol:
WGSW-28040(config)# sntp server 192.168.0.50 port 111
6.3.33 Copy Command
Copy Running-config
Description:
Copy the running-config configurations
Syntax:
copy running-config <startup-config|tftp> [<file_name|A.B.C.D>] [<remote_file>]
Parameters:
Startup-config : Backup the switch configurations