Planet WGSW-28040 - MST Configuration Name; MST Configuration Revision; Msti Vlan

User’s Manual of WGSW-28040 / 28040P
256
Port_list : Port list or 'all'
Example:
To set the mcheck:
WGSW-28040(config)# spanning-tree port 1 mcheck
MST Configuration Name
Description:
Set the MST configuration name
Syntax:
spanning-tree mst config-name <name>
Parameters:
name : Bridge name (Max.32 charactor)
Example:
To set the MST configuration name:
WGSW-28040(config)# spanning-tree mst config-name test
MST Configuration Revision
Description:
Sets the revision level
Syntax:
spanning-tree mst config-revision <level>
Parameters:
level : Revision level (0-65535)
Example:
To set the MST revision level:
WGSW-28040(config)# spanning-tree mst config-revision 100
MSTI VLAN
Description:
Add the MSTI-to-VLAN mapping
Syntax:
spanning-tree mst <msti> vlan <vid>