Planet WGSW-28040 - Copy TFTP; Copy Startup-Config

User’s Manual of WGSW-28040 / 28040P
264
tftp : Send configuration to TFTP server
file_name : Config file name
A.B.C.D : IP default gateway format is A.B.C.D where (A/B/C/D = 0 ~ 254)
Remote_file : Remote file name on TFTP server
Example:
To copy the running-config to TFTP server:
WGSW-28040(config)# copy running-config tftp 192.168.0.21 config
Copy TFTP
Description:
Retrieve configuration from TFTP server
Syntax:
copy <running-config|startup-config|firmware> [<A.B.C.D|local_file>] [<remote_file>]
Parameters:
running-config : Running configurations
startup-config : Startup config configurations
firmware : Run time firmware image
A.B.C.D : IP default gateway format is A.B.C.D where (A/B/C/D = 0 ~ 254)
local_file : Local startup-config file name
Remote_file : Remote file name on TFTP server
Example:
To copy the running-config to TFTP server:
WGSW-28040(config)# copy running-config tftp 192.168.0.21 config
Copy Startup-config
Description:
Copy the startup-config configurations
Syntax:
copy startup-config tftp <A.B.C.D|local_file> [<remote_file>] [<local_file>]
Parameters:
A.B.C.D : IP default gateway format is A.B.C.D where (A/B/C/D = 0 ~ 254)
local_file : Local startup-config file name
Remote_file : Remote file name on TFTP server
Example:
To copy the startup-config configurations: