User’s Manual of WGSW-28040 / 28040P
58
4.2.8.3 Community
Configure SNMP Community on this page. The SNMP Community screen in Figure 4-2-21 & Figure 4-2-22 appears.
Figure 4-2-21 Community Setting page screenshot
The page includes the following fields:
Object Description
• Community
Indicates the community read/write access string to permit access to SNMP
agent. The allowed string length is 0 to 255, and the allowed content is the ASCII
characters from 33 to 126. The field only suits to SNMPv1.
• Type
Indicates the SNMP community type operation. Possible types are:
Read-Only: Set access string type in read-only mode.
Read-Write: Set access string type in read-write mode.
Buttons
: Click to apply changes.
Figure 4-2-22 Community Status page screenshot
To Next Page
Loading...
