User’s Manual of WGSW-28040 / 28040P
247
Parameters:
port_list : Port list or 'all'
1p : 802.1p
dscp : DiffServ Code Point
Example:
To set remarking ability for port:
WGSW-28040(config)# qos remark port 1 1p
QoS Remark CoS
Description:
Set remarking ability for CoS
Syntax:
qos remark <cos-1p|cos-dscp> <range1> to <range2>
Parameters:
cos-1p : CoS to 802.1p
cos-dscp : CoS to DSCP
range1 : range is 0-7
range2 : 802.1p range is 0-7, DSCP range is 0-63
Example:
To set remarking ability for QoS:
WGSW-28040(config)# qos remark cos-1p 0 to 1
QoS Map
Description:
Set QoS remap configuration
Syntax:
qos map <dscp-cos|1p-cos|port-cos|cos-queue> <range1|port_list> to <range2>
Parameters:
dscp-cos : DSCP to CoS
1p-cos : 802.1p to CoS
port-cos : Port-based priority
cos-queue: CoS to queue mapping
range1 : DSCP range is 0-63, 802.1p priority range is 0-7,
port_list : Port list or 'all'
range2 : CoS range is 0-7,
To Next Page
Loading...
Need help?
General