Planet WGSW-28040 - Show Storm Control; Show Spanning Tree

User’s Manual of WGSW-28040 / 28040P
220
---------------------------------------------------------------
public read-only
private read-write
Total Community Entries: 2
IP Address Community Name
------------------------------------------------------------
Total Trap Entries: 0
WGSW-28040(config)#
Show Storm Control
Description:
Show storm control configuration
Syntax:
Show storm-control port <port_list>
Parameters:
<port_list> : Port list or 'all'
Example:
Show storm control configuration:
WGSW-28040(config)# show storm-control port 1
Port | Broadcast | Multicast | Unknown-Unicast | Unkonwn-Multicast
| (pps) | (pps) | (pps) | (pps)
-----------+----------------+----------------+------------------------+----------------------------
1 Off Off Off Off
WGSW-28040(config)#
Show Spanning Tree
Description:
Show spanning tree configuration
Syntax:
Show spanning-tree [<port>] [port_list] [<mst>] [mst_id]