Planet WGSW-28040 - Show SVLAN

User’s Manual of WGSW-28040 / 28040P
221
Parameters:
Port : port configuration
<port_list> : Port list or 'all'
Mst : instance configruation
<mst_id> : instance ID (0~15)
Example:
Show spanning tree configuration:
WGSW-28040(config)# show spanning-tree port 1
STP Port Information
==================================================
Port Identifier : 0x8001 (128/ 1)
--------------------------------------------------
External Path Cost : 0 /0
Edge Port : Auto /Yes
BPDU Filter : False
BPDU Guard : False
Point-to-Point MAC : Auto /Yes
--------------------------------------------------
Pkts Counters : Rx:0/0/0 Tx:0/0/0
--------------------------------------------------
WGSW-28040(config)#
Show SVLAN
Description:
Show SVLAN configuration
Syntax:
Show svlan [<port>] [port_list] <pvid|service-port> [<table>] [svid]
Parameters:
Port : port configuration
<port_list> : Port list or 'all'
Pvid : pvid
Service-port : NNI Port Setting
<table> : table list
Svid :svid
Example:
Show SVLAN configuration: