Planet WGSW-28040 - Clear ARP; Clear Log; MAC Address Table Command; Static MAC Address Table

User’s Manual of WGSW-28040 / 28040P
239
WGSW-28040(config)# clear port 1 statistics
Clear ARP
Description:
Clear entries in the ARP cache
Syntax:
clear arp <A.B.C.D>
Parameters:
A.B.C.D : IP Address format is A.B.C.D where (A/B/C/D = 0 ~ 254)
Example:
Clear entries in the ARP cache:
WGSW-28040(config)# clear arp 192.168.0.21
Clear Log
Description:
Clear log configuration
Syntax:
clear log <flash|ram>
Parameters:
flash :log from flash
ram :log from RAM
Example:
Clear log configuration:
WGSW-28040(config)# clear log ram
6.3.14 MAC Address Table Command
Static MAC Address Table
Description:
Set static MAC address
Syntax:
Mac-address-table static <A:B:C:D:E:F> vlan <vid> port <port_list>
Parameters:
A:B:C:D:E:F :MAC address xx:xx:xx:xx:xx:xx