Planet WGSW-28040 - Edge Port; BPDU Filter

User’s Manual of WGSW-28040 / 28040P
254
Parameters:
Port_list : Port list or 'all'
Cost : The value of path cost (0~ 200000000, 0 = Auto)
Example:
To set the path cost:
WGSW-28040(config)# spanning-tree port 1 path-cost 2000
Edge Port
Description:
Sets the edge port for specified port
Syntax:
spanning-tree port <port_list> edge-port <enable|disable|auto>
Parameters:
Port_list : Port list or 'all'
enable :Force enable
disable :Force disable
auto :Auto mode
Example:
To set the edge port:
WGSW-28040(config)# spanning-tree port 1 edge-port enable
BPDU Filter
Description:
Sets the BPDU-Filter for specified port
Syntax:
spanning-tree port <port_list> bpdu-filter <enable|disable>
Parameters:
Port_list : Port list or 'all'
enable :Force enable
disable :Force disable
Example:
To set the BPDU filter:
WGSW-28040(config)# spanning-tree port 1 bpdu-filter enable