Planet WGSW-28040 - Ping Command; Ping; Time Command; Timezone

User’s Manual of WGSW-28040 / 28040P
262
6.3.30 Ping Command
Ping
Description:
Send ICMP ECHO_REQUEST to network hosts
Syntax:
Ping <ipv4_address|ipv6_address> <times>
Parameters:
Ipv4_address : The IP address to PING
Ipv6_address : The IPv6 address to PING
times : The number of repetitions (1- 999999999)
Example:
To send ICMP ECHO_REQUEST to network hosts:
WGSW-28040(config)# ping 192.168.0.21 999999999
6.3.31 Time Command
Timezone
Description:
Set the time zone of system
Syntax:
time timezone <before-utc|after-utc> <hour> <min>
Parameters:
Before-utc : Time zone before UTC
After-utc : Time zone after UTC
hour : Time zone hour (0-12)
min : Time zone min (0-59)
Example:
To set the time zone of system:
WGSW-28040(config)# time timezone before-utc 12 0
Date
Description:
Set the date of system