Planet WGSW-28040 - ACE Action

User’s Manual of WGSW-28040 / 28040P
208
Syntax:
Ace <ace_index> field [<src-mac>] [A:B:C:D:E:F] [<dst-mac>] [A:B:C:D:E:F] [<src-ip>] [A.B.C.D] [<dst-ip>] [A.B.C.D]
[<ethertype>] [etype] [<ip-protocol>] [protocol] [<tos>] [tos_value] [<l4-src-port>] [sport] [<l4-dst-port>] [dport] [<tcp-flag>]
[flag]
Parameters:
<ace_index> : ACE ID (1-127)
<vid> : VLAN ID (1-4094)
<src-mac> : Source MAC address
<dst-mac> : Destination MAC address
A:B:C:D:E:F :MAC address xx:xx:xx:xx:xx:xx
<src-ip> : Source IP address
<dst-ip> : Destination IP address
A.B.C.D : IP Address format is A.B.C.D where (A/B/C/D = 0 ~ 254)
<ethertype> : Ethernet type
etype : Ethernet type keyword
<ip-protocol> : IP protocol
protocol : IP protocol number
<tos> : ToS
tos_value : ToS value
<l4-src-port> : Source L4 port
Sport : Source UDP/TCP port range
<l4-dst-port> : Destination L4 port
dport : Destination UDP/TCP port range
<tcp-flags> : TCP flags
flag : flag value
Example:
Configuration ACE field:
WGSW-28040(acl)# ace 1 field ethertype 8100
WGSW-28040(acl)#
ACE Action
Description:
Configure ACE action
Syntax:
Ace <ace_index> action [permit|deny]
Parameters:
<ace_index> : ACE ID (1-127)
permit : Permit forwarding