User’s Manual of WGSW-28040 / 28040P
82
4.4.2 LACP Configuration
This page is used to configure the LACP Configruation. The LACP Configuration screen in Figure 4-4-4 & Figure 4-4-5 appears.
Figure 4-4-4 LACP Setting page screenshot
The page includes the following fields:
Object Description
• LACP Enable
Enable or disable the LACP function. The default value is "Disabled".
• System Priority
A value which is used to identify the active LACP. The Managed Switch with the
lowest value has the highest priority and is selected as the active LACP peer of
the trunk group.
Buttons
: Click to apply changes.
Figure 4-4-5 LACP Information page screenshot
To Next Page
Loading...
Need help?
General